METHOD A
1. APPLY A DRY CLEANING SOLVENT* - use damp towel
2. BLOT – don’t’ rub
3. REPEAT solvent application as above
4. BLOT – don’t rub
5. WATER – apply with damp towel
6. BLOT – finish with weighted pad of towel
METHOD B
1. SCRAPE or BLOT up excess spill
2. APPLY DETERGENT* - use damp towel
3. BLOT – don’t rub
4. APLLY WHITE VINEGAR (undiluted) – use damp towel
5. BLOT – don’t rub
6. WATER – apply with damp sponge
7. BLOT – finish with weighted pad of towel
METHOD C
1. SCRAPE OR BLOT up excess spill
2. APPLY dry baking soda
3. SCRAPE and VACUUM
4. WATER – use damp sponge to rinse remaining baking soda – don’t overwet
5. BLOT – don’t rub
6. APPLY PRESOAK SOLUTION – use damp towel
7. WATER – rinse as above
8. BLOT – don’t rub – dry well
9. APPLY DRY POWDER CLEANER*
10. VACUUM
METHOD D
1. SCRAPE or BLOT up excess spill
2. FREEZE with ice cubes
3. SHATTER – with blunt object like the back of a large spoon
4. VACUUM chips away before they melt
METHOD E
1. APPLY NAIL POLISH REMOVER* (non-oily type) – use cotton swab to apply to the spill
– don’t wet through to carpet backing
2. PICK UP SOFTENED MATERIALS – use white paper towel and push toward the center
of the soil to avoid spreading stain
3. REPEAT ABOVE – soften and carefully remove a layer of the spill each time – haste?
May spread the stain and/or damage the carpet
METHOD F
1. SCRAPE or BLOT up excess spill
2. APPLY DETERGENT SOLUTION*
3. Use damp towel – leave in 3 – 5 minutes
4. BLOT – don’t rub
5. APPLY WHITE VINEGAR (undiluted) – use damp towel
6. BLOT – finish with weighted dry towel
METHOD G
1. SCRAPE off excess material
2. COVER with BROWN PAPER
3. APPLY WARM IRON until material is absorbed. Be sure paper is large enough to cover the stained area. Take care never to touch the ironto thecarpet as the fiber may melt
4. CHANGE PAPER or ROTATE to clean area and repeat until all material is absorbed
METHOD H
1. Vaccum away as mush as possible
2. LOOSEN remaing material by tapping with a scrub brush or toothbrush – do not scrub
3. VACUUM
4. Apply dry powder*
5. TAP with BRUSH to work powder into carpet tufts – do not scrub
6. LET POWDER DRY – I hour or more
7. VACUUM
8. REPEAT dry powder application if necessary |
